(5 Ways): How to disable driver signature enforcement on Windows 7 / 8 / 10 (32/64 bit)

(4 Ways): How to disable driver signature enforcement on Windows 7 / 8 / 10 (32/64 bit) – (Flasherfile.com) When flashing smartphone on windows PC need communication with device conected on usb cable, the device will be recognized if the usb driver installed properly.

After launch windows 7, windows adding security feature Digital signature Enforcement so require all usb driver have a signed. and all driver not have signature will block by windows. so usb driver can’t install perfectly. to force install driver without signature enforcement you need you need to turn off digital signature enforcement feature.

most failure flashing caused by driver not install blocked by DSE windows feature. see sample in the picture below.
How to Disable Driver Signature Enforcement

on this page i will shared to you about how to disable driver signature enforcement.

5 Steps to Disable driver signature enforcement on Windows 10

[1] Disable driver signature enforcement permanently by Command prompt

this solution most likely by technician because this way can turn off disable driver signature enforcement (dse) permanent mode, and this solution simple step

  1. Press Windows logo on your keyboard ❖ and type command prompt click run as administrator and will openHow to Disable Driver Signature Enforcementor Press Windows Key + X to open Power User Menu. Select Command Prompt (Admin) from the menu.How to Disable Driver Signature Enforcement
  2. it will automatically open new windows command prompt How to Disable Driver Signature Enforcement windows 10 by Command Prompt
  3. Once the Command Prompt open, enter BCDEDIT /set nointegritychecks ON and press Enter
  4. To Re enable driver signature enforcement BCDEDIT /set nointegritychecks ON

or you can use second command still on command prompt windows

  1. Open command prompt as administrator
  2. type bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS and then enter How to Disable Driver Signature Enforcement by Command Prompt Permanent
  3. type again bcdedit.exe -set TESTSIGNING ON and enter now DSE already Off
    How to Disable Driver Signature by Flasherfile
    How to Disable Driver Signature by Flasherfile

    Close the command prompt and restart your PC to apply new configuration

  4. to reenable DSE just Open again command prompt as administrator
  5. type bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS and then enter
  6. type again bcdedit.exe -set TESTSIGNING OFF and enter now DSE active
  7. restart your PC to apply your configuration

[2] Disable driver signing code gpedit.msc

second solution disable driver signature enforcement (dse) from Local Group Policy Editor:

    1. type windows logo on keybord + r     [❖ + r]Disable Driver Signature tutorial
    2. type gpedit.msc and click okDisable Driver Signature by gpedit.msc
    3. In Local Group Policy Editor, from the left panel, click on User Configuration. then, from the main window double-click on Administrative Templates.How to disable Driver Signature Enforcement
    4. From the menu that will open double-click on System (double click)How to Disable Driver Signature Enforcement
    5. and then go to Driver Installation (doble click)How to Disable Driver Signature Enforcement
    6. Select the Code signing for device drivers entry.How to Disable Driver Signature Enforcement
    7. Select disable or enable to make DSE on or OFF and from the dropdown located beneath, click ApplyHow to Disable Driver Signature Enforcement
    8. Click Ok and apply your changes.
    9. Restart your Windows to applying your change configuration.

[3] Disable driver signature enforcement by Put Windows in test mode

If you don’t want to disable driver signing permanently, you can choose to enter Windows 10 test mode. if windows running on test mode all driver will be ignored check signature, so driver will be installed without check DSE, also this methode can install without disable DSE. but on the test mode All aplication can’t run so you must restart your windows after install driver.

  1. Open an elevated command prompt window on your PC: right-click on the Windows Start icon and select ‘Command prompt (Admin)’.
  2. In cmd type bcdedit /set TESTSIGNING OFF.How to disable Driver Signature Enforcement
  3. Close the cmd window and restart your computer.
  4. Install your drivers.
  5. Revert back to normal mode: open elevated cmd, enter bcdedit /set TESTSIGNING ON and restart your Windows 10 system.

(4) Disable Driver Signature by Change the Startup settings

This is the simplest way to disable driver signature enforcement on Windows 10, but bear in mind that this method will only disable driver signature temporarily.

To disable driver signature enforcement do the following:

  1. Press and hold the Shift key on your keyboard and click the Restart button.
  2. Choose Troubleshoot > Advanced options > Startup Settings and click the Restart button.Disable Driver Signature Solution
  3. When your computer restarts you’ll see a list of options. Press F7 on your keyboard to select Disable driver signature enforcement.
  4. Your computer will now restart and you’ll be able to install unsigned drivers.

Bear in mind that this method only temporarily disables driver signature enforcement, so be sure to install all the unsigned drivers as soon as you can.

this methode is temporary solution so after your computer restart the driver signature will automatically on [active]

(5) Disable Driver Signature by Script its Very Simple Solution

The last tutorial how to disable driver signature windows it use script, by double click script DSE on windows will automatically off and restart. this scprit can download on Script Disable Driver Signature

follow this step :

  1. Download the script
  2. Extract use Winrar or 7zip appDisable Driver Signature Enforcement
  3. doubel click ” DriverSignatureEnforcement_OFF.bat “  your PC will restart
  4. to reenable driver signature just click ” DriverSignatureEnforcement_ON “

Thanks for all

google, ufi box




Leave a Reply

Your email address will not be published. Required fields are marked *